Tube to Ducting Reveal Converter

Description

When installing Ambientika units, it may sometimes be required to convert from a 160mm tube to rectangular rigid ducting – the Tube to Ducting Reveal Converter is made for this purpose.

Since it is insulated, the Converter is well-suited to be used outside, e.g. when the outside grille is to be mounted on the window reveal.

Potentially, if a bathroom or a toilet doesn’t have access to an external wall, the converter can also allow the outlet to be extended (through an adjacent room, if needed).

After the installation, boxing can be used to cover the ducting and maintain interior aesthetics (maximum run lengths and minimum incline apply).

The kit consists of the following:

• 1 length of PVC rectangular rigid ducting with a cross-section of 54mm x 216mm, insulated on the outside with a 3mm insulation layer, enlarging the external dimensions to 60mm x 222mm.
  • Overall length: 660mm (663mm including insulation) – can be cut to size as required.
  • The spigot end of the ducting features an adapter, converting the ducting into a 160mm tube inlet with a gasket – suitable for connecting 160mm Ambientika models.
• 1 outside grille, with external dimensions of 75mm x 250mm
• 1 end cap (providing temporary closure/protection), 54mm x 216mm, made of polystyrene – already fitted to the rectangular end of the ducting (must be removed before mounting the external grille and operating the Ambientika)
• (optional) additional 90° ducting run when a bend is required. The extra ducting is 616mm long – can be cut to size.

The ducting is to be installed with a 3° incline towards the grille to prevent potential condensed water droplets from accumulating inside it.