Dew Point Ventilation Controller

Dew Point Ventilation Controller for de-humidification

The Dew Point Ventilation Controller is used to enable automatic ventilation in high-humidity areas (e.g. basements, etc.) or where constant temperatures are preferred (wine cellars, etc.)

It is extremely effective when working with Ambientika Solo+ ventilators – up to 10 units can be connected to the controller to work as a system, with each unit able to cover an area of up to 30m² (assuming a standard ceiling height of approximately 2.5m).

The Dew Point Ventilation Controller determines the optimal ventilation schedule, utilising two precision sensors measuring temperature and humidity both indoors and outdoors. The controller then automatically operates the ventilators to sufficiently de-humidify the area.

The Dew Point Ventilation Controller can also communicate via Wi-Fi and can be operated via the app (download link below).

The wired version includes two sensors with a 10m cable attached to each sensor. The wireless version includes two wireless sensors with AA batteries and the Controller connects to these sensors via Wi-Fi.

Typically, the power supply to the ventilators would run from the Dew Point Ventilation Controller. However, to aid the installation process, the Dew Point Remote Receiver (sold separately) can be used to power an Ambientika ventilator without the need to run power supply cables all the way from the Dew Point Ventilation Controller. The Receiver communicates with the Controller via radio instead of Wi-Fi.

The Dew Point Ventilation Controller is equipped with an EU plug and comes with an EU-UK adapter.

Programmable settings:

• minimum temperature
• maximum temperature
• ventilation time
• ventilation interval
• phase offset
• minimum humidity
• digital lock
• operation time

Optimal settings:

• minimum temperature: 12° C
• maximum temperature: 25° C
• ventilation time: 30 minutes
• ventilation interval: 20 minutes
• phase offset: 1.0
• digital lock: Off
• operation time: 00:00 to 23:59

Recommended accessories: Dew Point Remote Receiver (sold separately)

The Dew Point Remote Receiver can be powered through any available socket within proximity of the ventilator’s desired location in order to minimise the length of cabling used.

Multiple Remote Receivers can be connected to one Dew Point Ventilation Controller. A typical setup would be for each Remote Receiver to control one ventilator.