Ambientika OFFICE

Description

Heat Recovery Ventilator

200mm (8″) version of our Ambientika Heat Recovery ventilator – ideal for larger or commercial premises.

General properties

• Larger diameter for enhanced airflow
• Sufficient for an area of up to 50m² per unit (assuming a standard ceiling height of approximately 2.5m)
• Suitable for domestic settings with a higher airflow requirement
• Suitable for offices or commercial locations (waiting rooms, hair salons, schools, surgeries, etc.)
• Suitable for rental properties, where landlords can control ventilation via the app when required
• Can be flush-mounted or surface-mounted – kit included for both options
• Contains a ceramic heat exchanger with a market-leading efficiency of up to 93%
• Attractive design
• Low energy consumption
• Alternating airflow
• Contains a brushless motor, electronically controlled and mounted behind the heat exchanger for reduced noise
• Quiet operation
• Made of durable, high-quality materials
• Simple installation with no ducting necessary
• No drainage for condensed water required
• Equipped with four sensors: humidity, light, temperature, and VOC (volatile organic compound)
• A choice of different settings and programs
• Adjustable flow rate of up to 100 cubic metres per hour
• Easy-to-clean filters
• Controlled via the app (download link provided below) – 2.4GHz band WiFi required
• Able to connect to Home Assistant smart home automation
• Able to interconnect with other units (2.4GHz internet access required) to force desired airflow patterns throughout the home
• Suitable for installation in external walls from 250mm to 500mm thick
• Can also be controlled via Remote Control (not included)

For a side-by-side comparison of Ambientika models and their attributes, check out our comparison table.

Don’t have access to the external wall? You can run an extension tube of the same diameter through an adjacent room to reach the outside wall. The extension tube can be up to 3m long if it is straight or 2.5m if there is a bend along the way.

Included in the package

• Main unit with heat exchanger and tube
• Flush-mount kit for the alternative fitting method
• Regular white outer cover
• Set of two G3 filters
• Installation template
• Instructions for use

Controlled using the Ambientika app

New!

Smart Mode: Intelligent Ventilation

Based on measurements taken from 4 integrated sensors within the unit, the ventilation system independently decides how best to ventilate the space in order to achieve perfect air quality indoors.

These integrated sensors are the following:

• Internal temperature sensor;
• Humidity sensor;
• Twilight sensor
• VOC sensor (this “air quality” sensor does not directly detect CO₂, but it does allow for a good approximation of carbon dioxide measurement through detection of volatile organic compounds)

The measurement values are compared online with the nearest weather station.

Additional automatic functions in Smart mode:

When these three conditions occur at the same time…
Indoor temperature > 24 °C
Outdoor temperature > 20 °C
Outdoor T < indoor T
…the ventilation system switches to “summer mode” and only works in FREE COOLING mode without heat recovery.

When it is dark in the master ventilation unit room, the whisper-quiet night mode is automatically activated.

The Ambientika smartphone app displays air quality status based on the Renesas table below: